Not Sure What You’re Looking For?

2018 Generac 200kW Gaseous Generator MG200

Call for Price


Availability
Brochure
Year
2018
Manufacturer
Generac
Model
200kW Gaseous Generator MG200

Overview

Description

These generators are equipped with a heavy-duty, industrial-grade engines that stand up to extreme conditions inside and outside. That applies to our factory-built enclosures as well.

Features
  • Generator Enclosure: Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
  • Generac Spark-Ignited Engine: Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
  • Industrial Alternator: Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
  • PowerManager® Controller: Generac engineers its generator controls with safety and convenience as top priorities.
  • Generator Paralleling: Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
Engine Specifications
  • Make: Generac
  • Cylinder #: 6
  • Type: In-line
  • Displacement - L (Cu In): 14.17 (864.71)
  • Bore - mm (in): 135 (5.31)
  • Stroke - mm (in): 165 (6.50)
  • Compression Ratio: 9.5:1
  • Intake Air Method: Turbocharged/Aftercooled
  • Number of Main Bearings: 7
  • Connecting Rods: Carbon Steel
  • Cylinder Head: Cast Iron GT250, OHV
  • Cylinder Liners: Ductile Iron
  • Ignition: Altronic CD1
  • Piston Type: Aluminum
  • Crankshaft Type: Ductile Iron
  • Lifter Type: Solid
  • Intake Valve Material: Special Heat- Resistant Steel
  • Exhaust Valve Material: High Temp Alloy Steel
  • Hardened Valve Seats: High Temp Alloy Steel
Engine Governing
  • Governor: Electronic
  • Frequency Regulation (Steady State): ±0.25%
Lubrication System
  • Oil Pump Type: Gear
  • Oil Filter Type: Twin Full-flow with Intercooler
  • Crankcase Capacity - L (qts): 34.3 (36.2)
Cooling System
  • Cooling System Type: Pressurized Closed Recovery
  • Fan Type: Pusher
  • Fan Speed (rpm): 1,894
  • Fan Diameter - mm (in): 762 (30)
Fuel System
  • Fuel Type: Natural Gas
  • Carburetor: Down Draft
  • Secondary Fuel Regulator: Standard
  • Fuel Shut Off Solenoid: Standard (Dual)
  • Operating Fuel Pressure: 7” - 11” H2O
Engine Electrical System
  • System Voltage: 24 VDC
  • Battery Charger Alternator: Standard
  • Battery Size: See Battery Index 0161970SBY
  • Battery Voltage: (2) - 12 VDC
  • Ground Polarity: Negative
Alternator Specifications
  • Standard Model Generac: 520 mm
  • Poles: 4
  • Field Type: Revolving
  • Insulation Class - Rotor: H
  • Insulation Class - Stator: H
  • Total Harmonic Distortion: <5%
  • Telephone Interference Factor (TIF): <50
  • Standard Excitation: Permanent Magnet
  • Bearings: Single Sealed
  • Coupling: Direct, Flexible Disc
  • Prototype Short Circuit Test: Yes
  • Voltage Regulator Type: Full Digital
  • Number of Sensed Phases: All
  • Regulation Accuracy (Steady State): ±0.25%

Specs

Engine

Engine Type
Generac In-line 6
Horsepower
304 hp
Displacement
14.17 L (864.71 cu.in.)

Dimensions

Length
153.89 in. (3909 mm)
Width
52.73 in. (1339.3 mm)
Height
69.67 in. (1769.6 mm)
Weight
Steel: 6577 lb. (2983 kg); Aluminum: 6035 lb. (2738 kg)

Other

AC Output
200 kW

Related Products